Induction coil
The consumables induction coils are made only from high conductivity copper. We can also offer a special coating process for contact surfaces on the coil which reduces oxidisation that can lead to resistance on coil connection.
The banded induction coil, tubular induction coil are available at option.
The induction coil is a tailored- made spare parts .
The induction coil is offered as per the diameter of steel tube and profile.
Related products
-
Tool holder
Tool holders are supplied with their own fixing system which utilises a screw, stirrup and carbide mounting plate. Tool holders are supplied as either 90° or 75° inclination, depending on your mounting fixture of the tube mill, the difference can be seen in the photos below. The tool holder shank dimensions are also normally standard at 20mm x 20mm, or 25mm x 25mm (for 15mm & 19mm inserts). For 25mm inserts, the shank is 32mm x 32mm, this size is also available f...
-
Solid Sate HF Welder,ERW welder,Parallel high f...
Production Description HF solid state welder is most important equipment of welded tube mill. The welding seam quality is determined by the HF solid state welder . SANSO can provide both MOSFET HF solid state welder and IGBT solid state welder. MOSFET HF solid state welder consisting of rectifier cabinet ,inverter cabinet ,water-water cooling device ,step down transformer,console and adjustable bracket ...
-
Zinc wire
Zinc wire is used in the production of galvanized pipes. The zinc wire is melted by a zinc spraying machine and sprayed on the surface of the steel pipe weld to prevent rusting of the steel pipe weld Zinc wire zinc content > 99.995% Zinc wire diameter 0.8mm 1.0mm 1.2mm 1.5mm 2.0mm 2.5mm 3.0mm 4.0mm are available at option. Kraft paper drums and carton packing are available at option
-
Slitting Line,Cut-To-Length Line,Steel plate sh...
Production Description lt is used for slitting the wide raw material coil into narrow strips in order toprepare material for subsequent processes as milling, pipe welding, coldforming, punch forming, etc. Moreover, this line can also slitting variousnon-ferrous metals. Process Flow loading Coil→Uncoiling→leveling→Cuing the Head and End→Circle Shear→Slitter Edge Recoiling→Accumulato...
-
Buckle making machine
The buckle-making machine uses control the cutting, bending, and shaping of metal sheets into the desired buckle shape. The machine typically consists of a cutting station, a bending station, and a shaping station. The cutting station uses a high-speed cutting tool to cut the metal sheets into the desired shape. The bending station uses a series of rollers and dies to bend the metal into the desired buckle shape. The shaping station uses a series of punches and dies ...
-
ERW76 welded tube mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...