Copper pipe,Copper tube, high frequency copper tube, induction copper tube
Production Description
It is mainly used for high-frequency induction heating of the tube mill. Through the skin effect, the two ends of the strip steel are melted, and the two sides of the strip steel are firmly connected together when passing through the extrusion roller.
Related products
-
ERW32 welded tube mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...
-
Roller set
Production Description Roller set Roller Material: D3/Cr12. Heat treatment hardness: HRC58-62. Keyway is made by wire cut. Pass accuracy is ensured by NC machining. Roll surface is polished. Squeeze roll Material: H13. Heat treatment hardness: HRC50-53. Keyway is made by wire cut. Pass accuracy is ensured by NC machining. ...
-
HSS and TCT Saw Blade
Production Description HSS saw blades for cutting all types of ferrous & non-ferrous metals. These blades come steam treated (Vapo) and can be used on all types of machines cutting mild steel. A TCT saw blade is a circular saw blade with carbide tips welded onto the teeth1. It is specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt, and titanium-based metal Tungsten carbide tipped saw blades are also used...
-
Outside Scarfing Inserts
SANSO Consumables offers a range of equipment and consumables for scarfing. This encompasses Canticut ID scarfing systems, Duratrim edge conditioning units and a full range of high quality scarfing inserts and associated tooling. OD SCARFING INSERTS Outside Scarfing Inserts OD scarfing inserts are offered In a full range of standard sizes (15mm/19mm & 25mm) with positive and negative cutting edges
-
ERW426 welded pipe mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling a...
-
Ferrite core
Production Description The consumables sources only the highest quality impeder ferrite cores for high frequency tube welding applications. The important combination of low core loss, high flux density/permeability and curie temperature ensures stable operation of the ferrite core in the tube welding application. Ferrite cores are available in solid fluted, hollow fluted, flat sided and hollow round shapes. The ferrite cores is offered as per ...