Roller set
Production Description
Roller set
Roller Material: D3/Cr12.
Heat treatment hardness: HRC58-62.
Keyway is made by wire cut.
Pass accuracy is ensured by NC machining.
Roll surface is polished.
Squeeze roll Material: H13.
Heat treatment hardness: HRC50-53.
Keyway is made by wire cut.
Pass accuracy is ensured by NC machining.
Advantages
The advantage:
- High wear-resistance.
- The rollers can be ground for 3-5times
- The roller has the large diameter ,large weight and high density
The bebefit:
High roller capacity
Once complete new roller can manufacture about 16000--18000ton tube ,the rollers can be ground for 3-5times, the roller after grinding can manufacture additional 8000-10000 ton tube.
The total tube throughput manufactured by one complete roller set: 68000 ton
Related products
-
ERW114 welded pipe mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...
-
Inner scarfing system
The inner scarfing system originated from Germany; it is simple in design and highly practical. The inner scarfing system is made of high-strength elastic steel, which has the characteristics of high strength, high temperature resistance and corrosion resistanceafter special heat treatment, It has small deformation and strong stability when working under high temperature conditions. It is suitable for high-precision thin-walled welded pipes and has been used by man...
-
ERW76 welded tube mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...
-
Copper pipe,Copper tube, high frequency copper ...
Production Description It is mainly used for high-frequency induction heating of the tube mill. Through the skin effect, the two ends of the strip steel are melted, and the two sides of the strip steel are firmly connected together when passing through the extrusion roller.
-
Solid Sate HF Welder,ERW welder,Parallel high f...
Production Description HF solid state welder is most important equipment of welded tube mill. The welding seam quality is determined by the HF solid state welder . SANSO can provide both MOSFET HF solid state welder and IGBT solid state welder. MOSFET HF solid state welder consisting of rectifier cabinet ,inverter cabinet ,water-water cooling device ,step down transformer,console and adjustable bracket ...
-
ERW273 welded pipe mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling a...