Zinc wire
Zinc wire is used in the production of galvanized pipes. The zinc wire is melted by a zinc spraying machine and sprayed on the surface of the steel pipe weld to prevent rusting of the steel pipe weld
- Zinc wire zinc content > 99.995%
- Zinc wire diameter 0.8mm 1.0mm 1.2mm 1.5mm 2.0mm 2.5mm 3.0mm 4.0mm are available at option.
- Kraft paper drums and carton packing are available at option
Related products
-
Shear and end welding machine
Production Description The shear and end welding machine is used for shearing the strip head from the uncoiler and strip end from accumulator and then welding the head and tail of strips together This equipment permits to continue the production without feeding the line for the first time for every coils used. Together with the accumulator, it permits to change coil and joint it with the already working strip maintaining constant the speed of...
-
ERW89 welded tube mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...
-
Inner scarfing system
The inner scarfing system originated from Germany; it is simple in design and highly practical. The inner scarfing system is made of high-strength elastic steel, which has the characteristics of high strength, high temperature resistance and corrosion resistanceafter special heat treatment, It has small deformation and strong stability when working under high temperature conditions. It is suitable for high-precision thin-walled welded pipes and has been used by man...
-
Outside Scarfing Inserts
SANSO Consumables offers a range of equipment and consumables for scarfing. This encompasses Canticut ID scarfing systems, Duratrim edge conditioning units and a full range of high quality scarfing inserts and associated tooling. OD SCARFING INSERTS Outside Scarfing Inserts OD scarfing inserts are offered In a full range of standard sizes (15mm/19mm & 25mm) with positive and negative cutting edges
-
Buckle making machine
The buckle-making machine uses control the cutting, bending, and shaping of metal sheets into the desired buckle shape. The machine typically consists of a cutting station, a bending station, and a shaping station. The cutting station uses a high-speed cutting tool to cut the metal sheets into the desired shape. The bending station uses a series of rollers and dies to bend the metal into the desired buckle shape. The shaping station uses a series of punches and dies ...
-
ERW219 welded pipe mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...