Steel sheet pile equipment Cold bending equipment – forming equipment
Production Description
U-shaped steel sheet piles and Z-shaped steel sheet piles can be produced on one production line, only need to replace the rolls or equip another set of roll shafting to realize the production of U-shaped piles and Z-shaped piles.
Application: Gl, Construction, Automotive, General Mechanical tubing, Furniture, Agriculture, Chemistry, 0il, Gas, Conduit, Contructur
|
Product |
LW1500mm |
|
Applicable Material |
HR/CR,Low Carbon Steel Strip Coil,Q235,S2 35,Gi Strips. ab≤550Mpa,as≤235MPa |
|
Pipe cutting Length |
3.0～12.7m |
|
Length Tolerance |
±1.0mm |
|
Surface |
With Zinc Coating or without |
|
Speed |
Max.Speed:≤30m/min (can customized according to customer's re quirements) |
|
Material of roller |
Cr12 or GN |
|
All auxiliary equipment and accessories, such as uncoiler, motor, bearing, cut ting saw, roller,,etc., All are top brands. The quality can be guaranteed. |
|
Advantages
1. High Precision
2. High Production efficiency,Line speed can be up to 30m/min
3. High Strength,The machine works stably at a high speed, which improves product quality.
4. High Good product rate, reach to 99%
5. Low wastage, Low unit wastage and low production cost.
6. 100% interchangeability of the same parts of the same equipment
Specification
|
Raw Material |
Coil Material |
Low Carbon Steel,Q235,Q195 |
|
Width |
800mm-1500mm |
|
|
Thickness: |
6.0mm-14.0mm |
|
|
Coil ID |
φ700- φ750mm |
|
|
Coil OD |
Max :φ2200mm |
|
|
Coil Weight |
20-30Tons |
|
|
|
Speed |
Max.30m/min |
|
|
Pipe Length |
3m-16m |
|
Workshop Condition |
Dynamic Power |
380V,3-phase, 50Hz(depends on local facilities) |
|
|
Control Power |
220V, single-phase, 50 Hz |
|
Size of the whole line |
130mX10m(L*W) |
|
Company Introduction
Hebei SANSO Machinery Co.,LTD is a high-tech enterprise registeredin Shijiazhuang City. Hebei Province. lt specialized in Developing and Manufacturing for the complete set of equipments and relatedtechnical service of High Frequency Welded pipe Production Lineand Large-size Square Tube Cold Forming Line.
Hebei sansoMachinery Co.,LTD With more than 130 sets all typesof CNC machining equipment, Hebei sanso Machinery Co.,Ltd., manufactures and exported to over 15 countries of welded tube/pipe mill, cold roll forming machine and slitting line, as well as auxiliary equipment for more than 15 years.
sanso Machinery, as a partner of users, provides not only high precision machine products, but also technical support everywhere &anytime.
Related products
-
Inner scarfing system
The inner scarfing system originated from Germany; it is simple in design and highly practical. The inner scarfing system is made of high-strength elastic steel, which has the characteristics of high strength, high temperature resistance and corrosion resistanceafter special heat treatment, It has small deformation and strong stability when working under high temperature conditions. It is suitable for high-precision thin-walled welded pipes and has been used by man...
-
ERW50 welded tube mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling a...
-
Roller set
Production Description Roller set Roller Material: D3/Cr12. Heat treatment hardness: HRC58-62. Keyway is made by wire cut. Pass accuracy is ensured by NC machining. Roll surface is polished. Squeeze roll Material: H13. Heat treatment hardness: HRC50-53. Keyway is made by wire cut. Pass accuracy is ensured by NC machining. ...
-
Ferrite core
Production Description The consumables sources only the highest quality impeder ferrite cores for high frequency tube welding applications. The important combination of low core loss, high flux density/permeability and curie temperature ensures stable operation of the ferrite core in the tube welding application. Ferrite cores are available in solid fluted, hollow fluted, flat sided and hollow round shapes. The ferrite cores is offered as per ...
-
ERW114 welded pipe mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...
-
Induction coil
The consumables induction coils are made only from high conductivity copper. We can also offer a special coating process for contact surfaces on the coil which reduces oxidisation that can lead to resistance on coil connection. The banded induction coil, tubular induction coil are available at option. The induction coil is a tailored- made spare parts . The induction coil is offered as per the diameter of steel tube and profile.