Ferrite core
Production Description
The consumables sources only the highest quality impeder ferrite cores for high frequency tube welding applications.
The important combination of low core loss, high flux density/permeability and curie temperature ensures stable operation of the ferrite core in the tube welding application. Ferrite cores are available in solid fluted, hollow fluted, flat sided and hollow round shapes.
The ferrite cores is offered as per the diameter of steel tube .
Advantages
- Minimum losses at working frequency of welding generator (440 kHz)
- High value of Curie temperature
- High value of specific electric resistance
- High value of magnetic permeability
- High value of saturation magnetic flux density at working temperature
Related products
-
Outside Scarfing Inserts
SANSO Consumables offers a range of equipment and consumables for scarfing. This encompasses Canticut ID scarfing systems, Duratrim edge conditioning units and a full range of high quality scarfing inserts and associated tooling. OD SCARFING INSERTS Outside Scarfing Inserts OD scarfing inserts are offered In a full range of standard sizes (15mm/19mm & 25mm) with positive and negative cutting edges
-
Uncoiler
Production Description Un-Coler is the important eauipment of entrance secton oft pipe mi ine. Mainiv used to hod stee strin to make coils untoid. Supplying raw material for the production line . Classification 1.Double Mandrels Uncoiler Two mandrels to prepare two coils, automatic rotating, expanding shrinking/braking using a pneumatic controlled device, with piess roller and...
-
Zinc wire
Zinc wire is used in the production of galvanized pipes. The zinc wire is melted by a zinc spraying machine and sprayed on the surface of the steel pipe weld to prevent rusting of the steel pipe weld Zinc wire zinc content > 99.995% Zinc wire diameter 0.8mm 1.0mm 1.2mm 1.5mm 2.0mm 2.5mm 3.0mm 4.0mm are available at option. Kraft paper drums and carton packing are available at option
-
Steel sheet pile equipment Cold bending equipme...
Production Description U-shaped steel sheet piles and Z-shaped steel sheet piles can be produced on one production line, only need to replace the rolls or equip another set of roll shafting to realize the production of U-shaped piles and Z-shaped piles. Application: Gl, Construction, Automotive, General Mechanical tubing, Furniture, Agriculture, Chemistry, 0il, Gas, Conduit, Contructur Product LW1500mm Applicable Material HR/CR,L...
-
Copper pipe,Copper tube, high frequency copper ...
Production Description It is mainly used for high-frequency induction heating of the tube mill. Through the skin effect, the two ends of the strip steel are melted, and the two sides of the strip steel are firmly connected together when passing through the extrusion roller.
-
ERW273 welded pipe mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling a...