Isistimu ye-scarfing yangaphakathi

Uhlelo lwangaphakathi lwe-scarfing lwavela eJalimane; ilula ekwakhiweni kwayo futhi iyasebenza kakhulu.

Uhlelo lwangaphakathi lwe-scarfing lwenziwe ngensimbi enamandla amakhulu, enezici zamandla aphezulu, ukumelana nokushisa okuphezulu nokumelana nokugqwala ngemuva kokwelashwa okukhethekile kokushisa,
Ine-deformation encane kanye nokuzinza okuqinile lapho isebenza ngaphansi kwezimo zokushisa eziphezulu.
Ifanele ukunemba okuphezulu kwamapayipi ashiselwe anezindonga ezincane futhi isetshenziswe izinkampani zamapayipi ashiselwe asekhaya iminyaka eminingi.

Isistimu ye-scarfing yangaphakathi inikezwa njengobubanzi beshubhu lensimbi.

Isakhiwo

1) indandatho yesikhafu

2) isikulufu sendandatho yesikhafu

3) I-roller yomhlahlandlela

4) Isikulufu esivulekile se-roller yokusekelwa ephansi

5) I-roller yomhlahlandlela

6) Intambo yokuxhumana

7) Impepho

8) Ishubhu yokupholisa yokudonsa

9)Umphathi wamathuluzi

10)I-roller yokusekela ephansi

11) Ukufakwa kwamanzi

Ukufakwa :

Beka isistimu ye-scarfing yangaphakathi phakathi kwe-fist fine pass stand kanye nesigaba sokushisela.
Ubakaki wokulungisa ufakwe ku-fist fine pass stand(figure-3) .ukuphela kwe-impeder kufanele kudlule umugqa we-roller ocindezelayo ophakathi nendawo ngo-20-30mm, okwamanje, indandatho yesikhafu igcinwa phakathi kwethuluzi le-2 langaphandle le-burr scarfing amanzi okupholisa kufanele anikezwe kusistimu yangaphakathi ye-scarfing ngokucindezela 4--8Bar.

Isimo sokusetshenziswa kwe-systen ye-scarfing yangaphakathi
1) Ikhwalithi enhle nensimbi ye-flatness strip iyadingeka ukwenza ishubhu lensimbi
2)Amanzi okupholisa ama-4-8bar ayadingeka ukupholisa inkaba ye-ferrite yesistimu ye-scarfing yangaphakathi
3) Umthungo oshiselwe we-2 ekupheleni kwemichilo kufanele ube flattness, kungcono ukugaya umthungo oshiselwe nge-angel grinder, lokhu kungagwema ukwephulwa kwendandatho.
4)I-systen ye-scarfing yangaphakathi isusa izinto zamapayipi ashiselwe:Q235,Q215, Q195(noma okulinganayo) . Ubukhulu bodonga buyi-0.5 kuya ku-5mm.
5) Hlanza i-roller yokusekela ephansi ukuze ugweme isikhumba se-oxide esinamathele ku-roller yokusekelwa ephansi.
6)Ukunemba kwama-burrs angaphakathi ngemuva kokukhuhla kufanele kube -0.10 kuya ku-+0.5 mm.
7) Umthungo oshiselwe weshubhu kumele uzinze futhi uqonde. engeza i-roller yokusekela ephansi ngaphansi kwethuluzi le-burr sacarfing yangaphandle.
.8)Yenza i-engeli yokuvula efanele.
9) I-ferrite core ene-flux ephakeme kazibuthe kufanele isetshenziswe ngaphakathi kwe-imperder yesistimu ye-scarfing yangaphakathi.iholela ekushiselweni kwejubane eliphezulu