Cut menyang dawa
Katranganipun:
Mesin Cut-kanggo-dawa digunakake kanggo uncoiling, leveling, sizing, nglereni coil logam menyang dawa dibutuhake sheet flat, lan numpuk. Cocog kanggo ngolah baja karbon sing digulung lan digulung panas, baja silikon, tinplate, stainless steel, lan kabeh jinis bahan logam sawise lapisan permukaan.
Kaluwihan:
- Fitur paling apik "donya nyata" Cut kanggo dawa toleransi ing industri preduli saka jembaré materi utawa kekandelan
- Bisa ngolah materi kritis permukaan tanpa menehi tandha
- Ngasilake kecepatan garis sing luwih dhuwur tanpa ngalami slippage materi
- Incorporate "tangan free" threading materi saka Uncoiler kanggo Stacker
- Kalebu Sistem Numpuk sing dipasang Shear sing ngasilake tumpukan materi kanthi sampurna
- Dirancang, diprodhuksi, lan dirakit kabeh ing pabrik kita. Boten kados manufaktur Strip Processing Equipment liyane, kita ora mung perusahaan sing assembles komponen rampung.
The Model
| ITEM | INFORMASI TEKNIS | |||
| Model | CT(0.11-1.2)X1300mm | CT(0.2-2.0)X1600mm | CT(0.3-3.0)X1800mm | CT(0.5-4.0)X1800mm |
| Kisaran Ketebalan Lembar (mm) | 0.11-1.2 | 0.2-2.0 | 0.3-3.0 | 0.5-4.0 |
| Lembar jembaré Range (mm) | 200-1300 | 200-1600 | 300-1550&1800 | 300-1600&1800 |
| Kacepetan Linear (m/min) | 0-60 | 0-60 | 0-60 | 0-60 |
| Rentang dawa nglereni (mm) | 300-4000 | 300-4000 | 300-4000 | 300-6000 |
| Range tumpukan (mm) | 300-4000 | 300-4000 | 300-6000 | 300-6000 |
| Presisi dawa nglereni (mm) | ± 0.3 | ± 0.3 | ± 0,5 | ± 0,5 |
| Bobot Coil (Ton) | 10&15T | 15&20T | 20&25T | 20&25 |
| Diameter leveling (mm) | 65(50) | 65(50) | 85(65) | 100(80) |